Nokia 7705 SAR - 3.11.2.14 Configuring Multilink PPP Bundles

Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 257
Use the following CLI syntax to configure basic ATM interface parameters for TDM
DS1/E1 channels.
CLI Syntax: port port-id
tdm
ds1
channel-group 1
atm
cell-format cell-format
min-vp-vpi value
e1
channel-group 1
atm
cell-format cell-format
min-vp-vpi value
Use the following CLI syntax to configure basic ATM interface parameters for IMA
multilink bundles.
CLI Syntax: port>multilink-bundle
ima
atm
cell-format cell-format
min-vp-vpi value
3.11.2.14 Configuring Multilink PPP Bundles
The following cards, modules, and platforms support multilink bundles:
• T1/E1 ports on the 7705 SAR-A (variants with T1/E1 ports)
• T1/E1 ports on the 7705 SAR-M (variants with T1/E1 ports)
• T1/E1 ports on the 7705 SAR-X
The following must have all member links of an MLPPP bundle configured on
the same card or module:
− 16-port T1/E1 ASAP Adapter card
− 32-port T1/E1 ASAP Adapter card
− T1/E1 ports on the 4-port T1/E1 and RS-232 Combination module (on
7705 SAR-H)