7705 SAR Interfaces
198
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
3.11.1.2 Configuring Adapter Card Network Queue QoS Policies
Network queue QoS policies can optionally be applied to adapter cards. Network
queue policies define the ingress network queuing at the adapter card node level.
Network queue policy parameters are configured in the config>qos context. For
more information on network queue policies, refer to the 7705 SAR Quality of
Service Guide, “Network Queue QoS Policies”.
Queue policies do not apply to the Auxiliary Alarm card.
Use the following CLI syntax to configure network queue policies on an adapter card.
CLI Syntax: config>card>mda#
network
ingress
queue-policy name
no shutdown
no shutdown
3.11.1.3 Configuring Ring Adapter Card or Module Network and
Network Queue QoS Policies
Network and network queue QoS policies can optionally be applied to a ring adapter
card or module, such as the 2-port 10GigE (Ethernet) Adapter card or 2-port 10GigE
(Ethernet) module.
Network policies define ring type network policies to a ring adapter card, where a ring
type is a network-policy-type.
Network queue policies define the add/drop port network queuing at the adapter card
node level.
Network and network queue policy parameters are configured in the config>qos
context. For more information on network queue policies, refer to the
7705 SAR Quality of Service Guide, “Network QoS Policies” and “Network Queue
QoS Policies”.
Use the following CLI syntax to configure network and network queue policies on an
adapter card.
CLI Syntax: config>card>mda#
network
ring
add-drop-port-queue-policy name
qos-policy network-policy-id
To Next Page
Loading...
