Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 457
3.13.2.22 ATM Interface Commands
atm
Syntax atm
Context config>port>multilink-bundle>ima
config>port>tdm>ds1>channel-group
config>port>tdm>e1>channel-group
config>port>tdm>ds3
config>port>tdm>e3
config>port>sonet-sdh>path
Description This command enables the context to configure ATM interface properties.
cell-format
Syntax cell-format cell-format
no cell-format
Context config>port>multilink-bundle>ima>atm
config>port>tdm>ds1>channel-group>atm
config>port>tdm>e1>channel-group>atm
config>port>tdm>ds3>atm
config>port>tdm>e3>atm
config>port>sonet-sdh>path>atm
Description This command configures the ATM cell format.
The no form of this command restores the default value.
Default uni
Parameters cell-format — the ATM cell format, either UNI or NNI (SONET/SDH ports do not support
the NNI format)
Values uni (user-to-network interface cell format)
nni (network-to-network interface cell format)
To Next Page
Loading...
