7705 SAR Interfaces
466
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
3.13.2.24 DS1 and E1 Commands
channelized
Syntax channelized {ds1 | e1}
no channelized
Context config>port>tdm>ds3
Description This command configures the associated DS3 channel as a channelized DS3 with DS1/E1
sub-channels.
The no form of this command disables channelization. The sub-channels must be deleted
first before the no command is executed.
Default no channelized
Parameters ds1 — specifies that the channel is DS1
e1 — specifies that the channel is E1
clock-source
Syntax clock-source {loop-timed | node-timed | adaptive | differential}
Context config>port>tdm>ds1
config>port>tdm>e1
Description This command specifies the clock source to be used for the link transmit timing.
The following can be configured for loop timing and node timing:
• T1/E1 CES circuits on the 16-port T1/E1 ASAP Adapter card
• T1/E1 CES circuits on the 32-port T1/E1 ASAP Adapter card
• T1/E1 CES circuits on the 2-port OC3/STM1 Channelized Adapter card
• T1/E1 CES circuits on the 4-port OC3/STM1 / 1-port OC12/STM4 Adapter card
• T1/E1 CES circuits on the 4-port DS3/E3 Adapter card
To Next Page
Loading...
