Nokia 7705 SAR - 3.11.1.7 Configuring Adapter Card Voice Attributes

Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 201
CLI Syntax: config>card>mda#
clock-mode {differential | dcr-acr} [timestamp-freq
{19440 | 25000 | 77760 | 103680}]
no shutdown
3.11.1.7 Configuring Adapter Card Voice Attributes
Use the following CLI syntax to assign the type of companding law and signaling to
be used on a 6-port E&M Adapter card installed in a 7705 SAR-8 and 7705 SAR-18
chassis.
CLI Syntax: config>card>mda#
mda-type a6-em
voice
companding-law {a-law | mu-law}
signaling-type {type-1 | type-2 | type-v}
no shutdown
Use the following CLI syntax to assign the type of companding law to be used on the
FXO and FXS ports on an 8-port Voice & Teleprotection card installed in a
7705 SAR-8 or 7705 SAR-18 chassis.
CLI Syntax: config>card>mda#
mda-type a8-vt
voice
companding-law {a-law | mu-law}
no shutdown
Use the following CLI syntax to assign the type of companding law to be used on the
FXO ports on an 8-port FXO Adapter card installed in a 7705 SAR-8 or 7705 SAR-18
chassis.
CLI Syntax: config>card>mda#
mda-type a8-fxo
voice
companding-law {a-law | mu-law}
no shutdown
Use the following CLI syntax to assign the type of companding law to be used on the
FXS ports on a 6-port FXS Adapter card installed in a 7705 SAR-8 or 7705 SAR-18
chassis.