7705 SAR Interfaces
286
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
3.13.1.4 APS Port Commands
config
— [no] port {aps-id}
— aps
— advertise-interval advertise-interval
—no advertise-interval
— hold-time hold-time
—no hold-time
— hold-time-aps ([lsignal-fail sf-time] [lsignal-degrade sd-time]}
—no hold-time-aps
— neighbor ip-address
—no neighbor
— protect-circuit port-id
—no protect-circuit
— [no] rdi-alarms {suppress | circuit}
— revert-time minutes
—no revert-time
— switching-mode {bi-directional | uni-1plus1}
— working-circuit port-id
—no working-circuit
3.13.1.5 Microwave Link Commands
config
— [no] port mw-link-id
— [no] shutdown
— mw
— [no] hold-time {[up hold-time-up] [down hold-time-down]}
— [no] peer-discovery
— [no] protection
— radio port-id create [main | spare]
—no radio port-id
— [no] database filename
— [no] name name-string
— rsl-history file-url
—no rsl-history
— [no] standalone
— suppress-faults [hber] [rsl-threshold] [rdi]
[all]
— [no] suppress-faults
— [no] tx-mute
— [no] revert [eps] [rps]
Note: Queue policies for APS are under the APS port hierarchy (port aps-id/sonet-
sdh/path/network/queue-policy name), rather than under the physical port, similar to the
configuration of regular SONET/SDH ports. See the SONET/SDH Commands hierarchy for
more information.