7705 SAR Interfaces
346
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
create — creates the MPR-e radio (mandatory)
main — sets the MPR-e radio as the main (active) radio
spare — sets the MPR-e radio as the spare (standby) radio
database
Syntax [no] database filename
Context config>port>mw>radio
Description This command configures the filename of the MPR-e radio database.
The no form of this command removes the MPR-e radio database configuration.
Default n/a
Parameters filename — specifies the name of the MPR-e radio database
Values up to 32 characters
name
Syntax [no] name name-string
Context config>port>mw>radio
Description This command specifies a name to be associated with an MPR-e radio.
The no form of this command removes the name configured for the MPR-e radio.
Default n/a
Parameters name-string — specifies the MPR-e radio name
Values up to 32 characters
Note:
• The port must have an encap-type of dot1q and it cannot be used by any service or
interface.
• Only a main radio can be configured on an odd-numbered port, that is, port 1 or 3.
To Next Page
Loading...
