7705 SAR Interfaces
848
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
3.14.2.4 Debug Commands
lag
Syntax lag [lag-id lag-id [port port-id]] [all]
lag [lag-id lag-id [port port-id]] [sm] [pkt] [cfg] [red] [iom-upd] [port-state] [timers]
[sel-logic] [mc] [mc-pkt]
no lag [lag-id lag-id]
Context debug
Description This command enables debugging for a LAG.
The no form of the command disables debugging for a LAG.
Parameters lag-id — specifies the LAG identifier, expressed as a decimal integer
Values 1 to 32
port-id — specifies the physical port ID in the slot/mda/port format
all — traces all LAG and LACP parameters
sm — traces the LACP state machine
pkt — traces LACP packets
cfg — traces the LAG configuration
red — traces LAG high availability
iom-upd — traces LAG IOM updates
port-state — traces LAG port state transitions
timers — traces LAG timers
sel-logic — traces LACP selection logic
mc — traces multi-chassis parameters
mc-pkt — traces received MC-LAG control packets with valid authentication
To Next Page
Loading...
