Nokia 7705 SAR - Page 847

Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 847
port
Syntax port port-id statistics
port port-id atm pvc [vpi[/vci]] statistics
port port-id atm pvp [vpi] statistics
port port-id frame-relay dlci dlci
Context clear
Description This command clears the statistics for the specified port or channel group.
Parameters port-id — specifies the physical port ID
statistics — specifies that port statistics will be cleared
atm — specifies that ATM port statistics will be cleared
vpi — specifies the ATM network virtual path identifier (VPI) for this PVC
vci — specifies the ATM network virtual channel identifier (VCI) for this PVC
pvc — clears PVC statistics
pvp — clears PVP statistics
frame-relay dlci — clears circuit-level frame relay statistics
dlci — specifies the frame relay virtual circuit identifier
The clear port port-id statistics frame-relay dlci dlci command differs from the
clear port port-id statistics command in the sense that the former clears the circuit-
level SAP statistics whereas the latter clears the frame-relay port statistics.
scada
Syntax scada bridge-id statistics
Context clear
Description This command clears the statistics for all or specified bridges or branches.
Parameters bridge-id — specifies the bridge ID or branch ID (the bridge ID is in the format
slot/mda/bridge-id, where bridge-id is 1 to 16; the branch ID is in the format
slot/mda/bridge-id.branch-id, where branch-id is 1 to 32)
statistics — specifies that bridge or branch statistics will be cleared
Syntax port-id slot[/mda[/port]] or slot/mda/port[.channel]
bundle-id bundle-type-slot/mda.bundle-num
bundle keyword
bundle-num: 1 to 32
type ima, ppp