Interface Configuration Guide 7705 SAR Interface Configuration Process
Edition: 01 3HE 11011 AAAC TQZZA 19
2 7705 SAR Interface Configuration
Process
Table 1 lists the tasks that are required to provision CSM cards, adapter cards, ports,
and SCADA bridges.
This guide is presented in an overall logical configuration flow. Each section
describes a software area and provides CLI syntax and command usage to configure
parameters for a functional area.
Table 1 Configuration Process
Area Task/Description Chapter
Provisioning Configure chassis slots and cards Configuring the IOM and Card Slot
Configure adapter cards Configuring Adapter Cards and Modules
Configure ports and bridges Configuring Ports
Configuring SCADA Bridges
Reference List of IEEE, IETF, and other
proprietary entities
Standards and Protocol Support
To Next Page
Loading...
