Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 305
 
— lmi-type {ansi | itu | none | rev1}
— mode {dce | dte | bidir}
— n391dte intervals
—no n391dte
— n392dce threshold
—no n392dce
— n392dte threshold
—no n392dte
— n393dce count
—no n393dce
— n393dte count
—no n393dte
— t391dte keepalive
—no t391dte
— t392dce keepalive
—no t392dce
— framing (E3) g751
— idle-cycle-flag {flags | ones}
—no idle-cycle-flag
— loopback {line | internal | remote}
—no loopback
— mode {network}
— mtu mtu-bytes
—no mtu
— network
— accounting-policy policy-id 
— [no] accounting-policy 
— [no] collect-stats 
— queue-policy name
—no queue-policy
— ppp
— keepalive time-interval [dropcount drop-count]
—no keepalive
— [no] report-alarm {ais | los | oof | rai | looped}
— [no] shutdown
3.13.1.23 Voice Commands
config
— [no] port port-id
— voice
— audio-wires {two-wires | four-wires}
— [no] em
— [no] channel-group channel-group-id
— description description-string
—no description
— encap-type cem
—no encap-type 
— mode access
— [no] shutdown
— fault-signaling {idle | seized}