Nokia 7705 SAR - Page 513

Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 513
Parameters threshold — sets the number of errors that will put the channel in an operationally down
state
Values 1 to 10
n393dce
Syntax n393dce count
no n393dce
Context config>port>tdm>ds1>channel-group>frame-relay
config>port>tdm>ds3>frame-relay
config>port>tdm>e1>channel-group>frame-relay
config>port>tdm>e3>frame-relay
config>port>serial>v35>channel-group>frame-relay
config>port>serial>x21>channel-group>frame-relay
Description This command configures the DCE monitored event count for the frame relay LMI.
The no form of this command returns the n393dce counter to the default value.
Default 4
Parameters count — sets the diagnostic window used to verify link integrity on the DCE interface
Values 1 to 10
n393dte
Syntax n393dte count
no n393dte
Context config>port>tdm>ds1>channel-group>frame-relay
config>port>tdm>ds3>frame-relay
config>port>tdm>e1>channel-group>frame-relay
config>port>tdm>e3>frame-relay
config>port>serial>v35>channel-group>frame-relay
config>port>serial>x21>channel-group>frame-relay
Description This command configures the DTE monitored event count for the frame relay LMI.
The no form of this command returns the n393dte counter to the default value.
Default 4
Parameters count — sets the diagnostic window used to verify link integrity on the DTE interface
Values 1 to 10