7705 SAR Interfaces
442
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
The no form of this command removes the accounting policy association from the network
interface, and the accounting policy reverts to the default.
Default n/a
Parameters policy-id — specifies the accounting policy-id of an existing policy. Accounting policies
record either service (access) or network information. A network accounting policy
can only be associated with the network port configurations. Accounting policies are
configured in the config>log>accounting-policy context.
Values 1 to 99
collect-stats
Syntax [no] collect-stats
Context config>port>dsl>network
config>port>ethernet>network
config>port>gpon>network
config>port>sonet-sdh>path>network
config>port>tdm>ds1>channel-group>network
config>port>tdm>ds3>network
config>port>tdm>e1>channel-group>network
config>port>tdm>e3>network
Description This command enables the collection of accounting and statistical data for the network
interface. When applying accounting policies, the data, by default, is collected in the
appropriate records and written to the designated billing file.
When the no collect-stats command is issued, the statistics are still accumulated by the
adapter cards. However, the CPU does not obtain the results and write them to the billing file.
If the collect-stats command is issued again (enabled), then the counters written to the
billing file will include the traffic collected while the no collect-stats command was in effect.
Default no collect-stats
egress
Syntax egress
Context config>port>ethernet>network
Description This command enables access to the context to assign network egress parameters.
Default n/a
To Next Page
Loading...
