7705 SAR Interfaces
456
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
shutdown
Syntax [no] shutdown
Context config>port>multilink-bundle>ima>test-pattern-procedure
Description This command enables a configured IMA test pattern procedure.
The no form of this command disables the IMA test pattern procedure.
version
Syntax version IMA-version
no version
Context config>port>multilink-bundle>ima>
Description This command configures the IMA version for the multilink bundle group. If there is a version
mismatch between this IMA group and the far-end IMA group, the IMA group will go
operationally down. To change the IMA version, you must first remove all member links from
the group.
Only IMA version 1.1 is supported.
Default 1-1
Parameters IMA-version — specifies the IMA version for this group
Values 1-1 — IMA version 1.1
To Next Page
Loading...
