Nokia 7705 SAR - Page 498

7705 SAR Interfaces
498
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
tlp-rx
Syntax tlp-rx decibels
Context config>port>voice
Description This command configures the analog-to-digital receive transmission level point (TLP) for the
specified port.
Parameters decibels — specifies the transmission level point expressed as an integer (in tenths)
Values –16.0 to +7.0 (for E&M four-wires)
–10.0 to +6.0 (for E&M two-wires)
–7.0 to 0.0 (for FXO and FXS)
Default 0.0 (for E&M)
–3.0 (for FXO and FXS)
tlp-tx
Syntax tlp-tx decibels
Context config>port>voice
Description This command configures the analog-to-digital transmit transmission level point (TLP) for the
specified port.
Parameters decibels — specifies the transmission level point expressed as an integer (in tenths)
Values –16.0 to +7.0 (for E&M four-wires)
–10.0 to +6.0 (for E&M two-wires)
–4.0 to +3.0 (for FXO and FXS)
Default 0.0 (for E&M)
0.0 (for FXO and FXS)