Nokia 7705 SAR - Page 231

Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 231
code-type {sonet | sdh}
no shutdown
3.11.2.4.1 Configuring a DSL Network Port
A network port is network-facing and participates in the service provider transport or
infrastructure network processes.
Use the following CLI syntax to configure DSL network port parameters.
CLI Syntax: port port-id
dsl
mode network
network
accounting-policy policy-id
[no] collect-stats
queue-policy name
The following CLI syntax shows an example of configuring a DSL port for network
mode.
Example: config# port 1/3/1
config>port# description "DSL network port"
config>port# dsl
config>port>dsl# mode network
config>port>dsl# exit
config>port># no shutdown
Use the config port info command to display port configuration information.
ALU-B>config>port>dsl# info
----------------------------------------------
description "DSL network port"
dsl
exit
no shutdown
----------------------------------------------
3.11.2.4.2 Configuring a DSL Access Port
Services are configured on access ports used for customer-facing traffic. If a Service
Access Point (SAP) is to be configured on a port, it must be configured for access
mode.