Nokia 7705 SAR - Page 238

7705 SAR Interfaces
238
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
3.11.2.5.2 Configuring a SONET/SDH Network Port
Use the following CLI syntax to configure a SONET/SDH network port on a 4-port
OC3/STM1 Clear Channel Adapter card.
CLI Syntax: port port-id
sonet-sdh
path [sonet-sdh-index]
encap-type ppp-auto
mode network
network
accounting-policy policy-id
[no] collect-stats
queue-policy name
[no] shutdown
The following CLI syntax shows an example of configuring a SONET/SDH network
port on a 4-port OC3/STM1 Clear Channel Adapter card.
Example: config# port 1/2/2
config>port# sonet-sdh
config>port>sonet-sdh# path
config>port>sonet-sdh>path# mode network
config>port>sonet-sdh>path# encap-type ppp-auto
config>port>sonet-sdh>path# no shutdown
config>port>sonet-sdh>path# exit
config>port>sonet-sdh# exit
config>port# exit
config#
Use the config port info command to display SONET/SDH port information for the
configured port.
ALU-B>config>port# info
....
#--------------------------------------------------
echo "Port Configuration"
#--------------------------------------------------
....
port 1/2/2
sonet-sdh
path
no shutdown
mode network
encap-type ppp-auto
network
queue-policy "default"
exit
exit
exit
no shutdown