Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 25
A maximum of 12 MDA adapter cards and 4 XMDA adapter cards can be installed in
the 7705 SAR-18 chassis. The following adapter cards are supported:
• 2-port 10GigE (Ethernet) Adapter card (maximum of 6)
• 2-port OC3/STM1 Channelized Adapter card (maximum of 12, depending on
channelization – see note below)
• 4-port OC3/STM1 / 1-port OC12/STM4 Adapter card (maximum of 6, depending
on channelization – see note below)
• 4-port OC3/STM1 Clear Channel Adapter card (maximum of 12)
• 4-port DS3/E3 Adapter card (maximum of 12, depending on channelization –
see note below)
• 6-port E&M Adapter card (maximum of 12)
• 6-port FXS Adapter card (maximum of 12)
• 6-port Ethernet 10Gbps Adapter card (maximum of 12)
• 8-port Ethernet Adapter card, version 2 (maximum of 12)
• 8-port FXO Adapter card (maximum of 12)
• 8-port Gigabit Ethernet Adapter card (maximum of 12)
• 8-port Voice & Teleprotection card (maximum of 12)
• 10-port 1GigE/1-port 10GigE X-Adapter card (maximum of 4)
• 12-port Serial Data Interface card (maximum of 12)
• 16-port T1/E1 ASAP Adapter card, version 2 (maximum of 12)
• 32-port T1/E1 ASAP Adapter card (maximum of 12)
• Auxiliary Alarm card (maximum of 12)
• CWDM OADM Adapter card (maximum of 12)
• Integrated Services card (maximum of 12)
• Packet Microwave Adapter card (maximum of 12)
• Power Injector card (maximum of 8)
To Next Page
Loading...
