Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 387
type
Syntax [no] type [gps] [glonass]
Context config>port>gnss
Description This command configures which GNSS system or systems will be used by the GNSS
receiver.
The no form of this command removes the specified GNSS system or systems.
By default, gps is configured. Configuring glonass does not remove gps; the GNSS receiver
will use both GPS and GLONASS systems.
Default gps
Parameters gps — configures the GNSS receiver to use the American GPS GNSS system
glonass — configures the GNSS receiver to use the Russian GLONASS GNSS system
To Next Page
Loading...
