Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 399
static-mac
Syntax [no] static-mac mac ieee-address port port-id [create]
Context config>card>mda>ring
Description This command creates a local static MAC entry in the FDB for the specified port. The
maximum number of static MAC addresses per ring adapter card is 256.
Static MAC definitions on one edge device are not propagated to other edge devices; that is,
each edge device has an independent FDB.
Only one static MAC entry (local or remote) can be defined per MAC address per instance.
By default, no static MAC address entries are defined.
The no form of this command deletes the static MAC entry with the specified MAC address
associated with the port from the FDB.
Parameters ieee-address — specifies the 48-bit MAC address for the static ARP in the form
aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee and ff are
hexadecimal numbers (cannot be all zeros). Allowed values are any non-broadcast,
non-multicast MAC, and non-IEEE reserved MAC addresses.
port-id — specifies the port that is associated with the specified MAC address
create — this keyword is mandatory when specifying a static MAC address
To Next Page
Loading...
