Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 551
The following example shows the details of a 16-port T1/E1 ASAP Adapter card in slot 3.
*A:ALU-1># show mda 1/3 detail
===============================================================================
MDA 1/3 detail
===============================================================================
Slot Mda Provisioned Type Admin Operational
Equipped Type (if different) State State
-------------------------------------------------------------------------------
1 3 a16-chds1 up provisioned
MDA Specific Data
Maximum port count : 16
Number of ports equipped : 16
Network ingress queue policy : default
Transmit timing selected : CPM Card A
Sync interface timing status : Qualified
Network ingress fabric policy : 1
Access ingress fabric policy : 1
Fabric Stats Enabled : FALSE
Capabilities : TDM, PPP, ATM, CEM
Min channel size : PDH DS0 Group
Max channel size : PDH DS1
Max number of channels : 256
Channels in use : 4
CEM MDA Specific Data
Clock Mode : adaptive
Hardware Data
Part number :
CLEI code :
Serial number :
Manufacture date :
Manufacturing string :
Manufacturing deviations :
Administrative state : up
Operational state : provisioned
Software version : N/A
Time of last boot : N/A
Current alarm state : alarm active
Base MAC address :
===============================================================================
*A:ALU-1>#