Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 557
The following example shows the details of a 2-port 10GigE (Ethernet) Adapter card.
*A:ALU-1> show mda 1/11 detail
===============================================================================
MDA 1/11 detail
===============================================================================
Slot Mda Provisioned Type Admin Operational
Equipped Type (if different) State State
-------------------------------------------------------------------------------
1 11 a2-10gb-xfp up failed
MDA Specific Data
Maximum port count : 3
Number of ports equipped : 3
Sync-E Capable : TRUE
Network ingress queue policy : r.nw.q3
Network Ring queue policy : r.nw.q2
Network Ring qos policy : 1
Network ingress fabric policy : 1
Access ingress fabric policy : 1
Fabric Stats Enabled : FALSE
Capabilities : Ethernet
Min channel size : Sonet STS-192
Max channel size : Sonet STS-192
Max number of channels : 3
Channels in use : 0
Hardware Data
Part number :
CLEI code :
Serial number :
Manufacture date :
Manufacturing string :
Manufacturing deviations :
Administrative state : up
Operational state : failed
Failure Reason : MDA type unknown in this build
Software version : N/A
Time of last boot : N/A
Current alarm state : alarm active
Base MAC address :
-------------------------------------------------------------------------------
QOS Settings
-------------------------------------------------------------------------------
===============================================================================
*A:ALU-1>#
To Next Page
