7705 SAR Interfaces
594
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
 
Output Example
*A:ALU-1># show external-alarms input alarm-1/1.d-1 detail
===============================================================================
Input alarm-1/1.d-3 Detail
===============================================================================
Name : dinput3
Admin Status : up Alarm State : ok
Detect Debounce : 2 secs Clear Debounce : 2 secs
Value : open
Description : Discrete Digital Input
----------------------------------------------------------------
# Threshold Severity Alarm Id Threshold State
----------------------------------------------------------------
1 closed major 3 ok
----------------------------------------------------------------
*A:ALU-1># show>#
Table 48 Show External Alarm Input Detail Fields 
Label Description
Input alarm input Detail
Name The name of the alarm input
Admin Status The administrative state of the alarm input
Alarm State The current state of the alarm input:
ghost: no trigger equipment is presently installed
ok: no triggers are detected
alarm detected: alarm is outstanding
not monitored: alarm or all triggers are administratively 
disabled
Detect Debounce The debounce time associated with the detection of the 
specified alarm input (not applicable to Ethernet ports)
Clear Debounce The debounce time associated with the clearance of the 
specified alarm input (not applicable to Ethernet ports)
Port State The value of the alarm input for Ethernet ports, either up 
or down