Nokia 7705 SAR - Page 608

7705 SAR Interfaces
608
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
3.14.2.1.5 Show Port Commands
port
Syntax port port-id acr [detail]
port port-id associations
port port-id cisco-hdlc
port port-id description
port port-id dot1x [detail]
port port-id dsl [detail]
port port-id ethernet [efm-oam | detail]
port port-id frame-relay [detail | dlci dlci]
port port-id ima-link
port port-id ppp [detail]
port port-id [statistics] [detail]
Context show
Description This command displays port or channel information. If no command line options are specified,
the show port command displays summary information for all ports on provisioned adapter
cards.
Parameters port-id — specifies the physical port ID
Syntax
port-id slot[/mda[/port]] or
slot/mda/port[.channel]
where:
slot 1
mda 1 to 6 7705 SAR-8
1 to 12 and X1 to X4 7705 SAR-18
1 (Ethernet), 2 (T1/E1),
or 3 (module)
7705 SAR-M
1 (Ethernet), 2 (module position
1), or 3 (module position 2)
7705 SAR-H
1 (Ethernet), 2 (RS-232) 7705 SAR-Hc
1 (Ethernet) or 2 (T1/E1) 7705 SAR-A
1 (Ethernet) or 2 (GNSS RF) 7705 SAR-Ax
1 7705 SAR-W
1 (Ethernet) 7705 SAR-Wx Ethernet-only variant,
and Ethernet and PoE+ variant
2 (DSL) 7705 SAR-Wx Ethernet and
xDSL variant