Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 615
Port State Up: the port is physically present and has a physical link
Down: the port is physically present but does not have a
link
Ghost: the port is not physically present
None: the port is in its initial creation state or about to be
deleted
Link Up: the port is physically present and has a physical
link.
When Link Up appears at the lowest level of a TDM
tributary, it means the physical connection is active but the
port is waiting before data traffic can flow. It is a waiting
state and indicates that data traffic will not flow until it
transitions to the Up state.
Link Down: the port is physically present but does not have
a link
Cfg MTU The configured MTU
Oper MTU The negotiated size of the largest packet that can be sent
on the port or channel specified in octets
LAG/Bndl The Link Aggregation Group (LAG) or multilink bundle to
which a TDM port is assigned
Port Mode network: the port is configured for transport network use
access: the port is configured for service access
hybrid: the port is configured for hybrid use (transport
network and service access per VLAN)
Port Encp The encapsulation type on the port
Port Type The type of port or optics installed
SFP/MDI MDX The SFP type on an Ethernet port (Ethernet, Fast Ethernet,
or GigE)
Table 56 Show General Port Output Fields (Continued)
Label Description
To Next Page
Loading...
