7705 SAR Interfaces
700
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
Unicast Packets Input/Output The number of packets, delivered by this sublayer to a
higher (sub) layer, which were not addressed to a
multicast or broadcast address at this sublayer. The total
number of packets that higher-level protocols requested
be transmitted, and which were not addressed to a
multicast or broadcast address at this sublayer, including
those that were discarded or not sent.
Multicast Packets Input/
Output
The number of packets, delivered by this sublayer to a
higher (sub) layer, which were not addressed to a unicast
or broadcast address at this sublayer. The total number
of packets that higher-level protocols requested be
transmitted, and which were not addressed to a unicast
or broadcast address at this sublayer, including those
that were discarded or not sent
Broadcast Packets Input/
Output
The number of packets, delivered by this sublayer to a
higher (sub) layer, which were not addressed to a unicast
or multicast address at this sublayer. The total number of
packets that higher-level protocols requested be
transmitted, and which were not addressed to a unicast
or multicast address at this sublayer, including those that
were discarded or not sent.
Discards Input/Output The number of inbound/outbound packets chosen to be
discarded to possibly free up buffer space
Unknown Proto Discards
Input/Output
For packet-oriented interfaces, the number of packets
received via the interface that were discarded because of
an unknown or unsupported protocol. For character-
oriented or fixed-length interfaces that support protocol
multiplexing, the number of transmission units received
via the interface that were discarded because of an
unknown or unsupported protocol. For any interface that
does not support protocol multiplexing, this counter will
always be 0. Unknown proto discards do not show up in
the packet counts
Ethernet-like Medium Statistics
Alignment Errors The total number of packets received that had a length
(excluding framing bits, but including FCS octets) of
between 64 and 1518 octets, inclusive, but that had either
a bad Frame Check Sequence (FCS) with an integral
number of octets (FCS Error) or a bad FCS with a non-
integral number of octets
Table 71 Show Port Detail Output Fields (Ring Ethernet) (Continued)
Label Description
To Next Page
Loading...
