7705 SAR Interfaces
710
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
CRC/Align Errors The total number of packets received that were between
64 and 1518 octets (excluding framing bits but including
FCS octets) that had either a bad Frame Check
Sequence (FCS) with an integral number of octets (FCS
Error) or a bad FCS with a non-integral number of octets
(Alignment Error)
Fragments The total number of packets received that were shorter
than 64 octets (excluding framing bits but including FCS
octets) that had either a bad Frame Check Sequence
(FCS) with an integral number of octets (FCS Error) or a
bad FCS with a non-integral number of octets (Alignment
Error)
Jabbers The total number of packets received that were longer
than 1518 octets (excluding framing bits but including
FCS octets) that had either a bad Frame Check
Sequence (FCS) with an integral number of octets (FCS
Error) or a bad FCS with a non-integral number of octets
(Alignment Error)
Octets Total number of octets received
Packets Number of packets received
Packets of n Octets Number of packets received, broken down by size
Port Statistics
Unicast Packets Input/Output The number of packets, delivered by this sublayer to a
higher (sub) layer, which were not addressed to a
multicast or broadcast address at this sublayer. The total
number of packets that higher-level protocols requested
be transmitted, and which were not addressed to a
multicast or broadcast address at this sublayer, including
those that were discarded or not sent.
Multicast Packets Input/
Output
The number of packets, delivered by this sublayer to a
higher (sub) layer, which were not addressed to a unicast
or broadcast address at this sublayer. The total number
of packets that higher-level protocols requested be
transmitted, and which were not addressed to a unicast
or broadcast address at this sublayer, including those
that were discarded or not sent
Table 72 Show Port Detail Output Fields (v-port) (Continued)
Label Description
To Next Page
Loading...
