Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 749
Effective PDVT The peak-to-peak packet delay variation (PDV) used by
the circuit emulation service
Since the operating system may adjust the jitter buffer
setting in order to ensure no packet loss, the configured
jitter buffer value may not be the value used by the
system. The effective PDVT provides an indication that
the PDV has been adjusted by the operating system.
Cfg Alarm The alarms that have alarm reporting enabled
Alarm Status The current alarm state (for example, stray, malformed,
packet loss, overrun, underrun, remote packet loss,
remote fault, or remote RDI)
Internal Digital Phase Locked Loop (DPLL) Statistics
ACR DPLL Statistics frequency offset mean: the ACR frequency offset mean
for the previous 15 sets of 60-s intervals
frequency offset stddev: the ACR frequency offset
standard deviation for the previous 15 sets of 60-s
intervals
phase error mean: the ACR input phase error mean and
output DCO mean for the previous 15 sets of 60-s
intervals
phase error stddev: the ACR input phase error standard
deviation and output DCO standard deviation for the
previous 15 sets of 60-s intervals
ACR State Statistics
Algorithm State Counts normal: the number of 2-s intervals the ACR algorithm
was in the normal state
Phase-tracking: the number of 2-s intervals the ACR
algorithm was in the phase-tracking state
Freq-tracking: the number of 2-s intervals the ACR
algorithm was in the frequency tracking state
Holdover: the number of 2-s intervals the ACR algorithm
was in the holdover state
Free-run: the number of 2-s intervals the ACR algorithm
was in the free-run state
Table 79 Show Port ACR Detail Output Fields (Continued)
Label Description
To Next Page
Loading...
