Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 751
===============================================================================
Enters Connecting : 0
EapLogoffs While Connecting : 0
Success While Authenticating : 0
Timeouts While Authenticating : 0
Failures While Authenticating : 0
Reauths While Authenticating : 0
EapStarts While Authenticating : 0
EapLogoffs While Authenticating : 0
Reauths While Authenticated : 0
EapStarts While Authenticated : 0
EapLogoffs While Authenticated : 0
Backend Responses : 0
Backend Access Challenges : 0
Backend Requests To Supplicant : 0
Backend Non Nak Responses : 0
Backend Auth Successes : 0
Backend Auth Failures : 0
===============================================================================
*A:ALU-1>#
Table 80 Show Port dot1x Output Fields
Label Description
802.1x Port Status
Port control auto: the 802.1x authentication mode is configured as
automatic. The port starts in an unauthorized state and
stays in that state until the first supplicant is authenticated
successfully.
force-auth: 802.1 authentication is disabled and the port
is automatically authorized
force-unauth: the port will always remain in the
unauthorized state
Port status authorized: the 802.1 port is authorized
unauthorized: the 802.1 port is unauthorized
Authenticator PAE state auto: the authenticator is set to the unauthorized state
force-auth: the authenticator is set to the authorized state
force-unauth: the authenticator is set to the unauthorized
state
To Next Page
Loading...
