Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 787
Configured minimum VPI The configured minimum allowable VPI value that can be
used on the ATM interface for a VPC
Last Unknown VPI/VCI The last unknown VPI/VCI that was received on this
interface
Mapping Direct: direct ATM cell mapping is used
Configured VPs The number of configured VPs
Configured IFCs The number of configured IFCs
TC Alarm State The ATM interface notifications indicating that the TC
sublayer is currently in the Loss of Cell Delineation (LCD)
defect maintenance state or that the TC sublayer is
currently not in the Loss of Cell Delineation (LCD) defect
maintenance state
HEC Errors (Dropped) The number of cells with uncorrectable HEC errors on
this interface
Number OCD Events The number of times the Out of Cell Delineation (OCD)
events occurred
HEC Errors (Fixed) The number of cells with correctable HEC errors on this
interface
Ingress CBR The total CBR bandwidth consumed on this interface in
the ingress direction
Ingress RT-VBR The total real-time variable bit rate (rt-VBR) bandwidth
consumed on this interface in the ingress direction
Ingress NRT-VBR The total non-real-time variable bit rate (nrt-VBR)
bandwidth consumed on this interface in the ingress
direction
Ingress UBR The total unspecified bit rate (UBR) bandwidth consumed
on this interface in the ingress direction
Egress CBR The total CBR bandwidth consumed on this interface in
the egress direction
Egress RT-VBR The total real-time variable bit rate (rt-VBR) bandwidth
consumed on this interface in the egress direction
Egress NRT-VBR The total non-real-time variable bit rate (nrt-VBR)
bandwidth consumed on this interface in the egress
direction
Table 93 Show Port ATM Output Fields (Continued)
Label Description
To Next Page
Loading...
