Nokia 7705 SAR - Page 796

7705 SAR Interfaces
796
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
3.14.2.1.7 Show Port-tree Commands
port-tree
Syntax port-tree port-id
Context show
Description This command displays the tree for SONET/SDH ports or channels.
Parameters port-id — specifies the physical port ID
Output The following output is an example of port-tree information, and Table 100 describes the
fields.
Output Example
*A:ALU-A# show port-tree 1/5/1
ifIndex type, sonet-sdh-index (* = provisioned)
======== =========================================
44072960 Port, N/A *
580943873 STS3, none
580943933 STS1, sts1-1
N/A VTG, 1.1
580943945 VT2, vt2-1.1.1
580943946 E1, 1.1.1
580943979 VT2, vt2-1.1.2
580943980 E1, 1.1.2
580944013 VT2, vt2-1.1.3
580944014 E1, 1.1.3
...
N/A VTG, 3.7
580946003 VT2, vt2-3.7.1
580946004 E1, 3.7.1
580946037 VT2, vt2-3.7.2
580946038 E1, 3.7.2
580946071 VT2, vt2-3.7.3
580946072 E1, 3.7.3
*A:ALU-A#
Syntax slot[/mda[/port]] or slot/mda/port[.channel]