EasyManua.ls Logo

Nokia 7705 SAR - Page 807

Nokia 7705 SAR
902 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 807
Output Example
*A:ALU-1># show lag 1 detail lacp-partner
===============================================================================
LAG Partner information
===============================================================================
Partner system ID : de:41:ff:00:00:00
Partner system priority : 32768
Partner operational key : 32768
===============================================================================
-------------------------------------------------------------------------------
LAG port 1/1/7 partner information
-------------------------------------------------------------------------------
Actor port : 33863
Partner admin system prio : 32768
Partner oper system prio : 32768
Partner admin system ID : 00:00:00:00:00:00
Partner oper system ID : de:41:ff:00:00:00
LAG 1 Ports Partner operational state information
Port The member physical port ID
Exp (Expired) – indicates whether the partner is in the Expired
state; if Yes, the LAG is not operational
Def (Default) – indicates whether the partner information
(system priority, key, port priority, and state of the
partner) is the default information that is configured
administratively or is information received through
LACPDUs. Default partner information is used if
LACPDUs were not received on time.
Dist (Distributing) – indicates whether the distribution of
outgoing frames is enabled or disabled on the link
Col (Collecting) – indicates whether the collection of
incoming frames is enabled or disabled on the link
Syn (Synchronization) – indicates whether the link is allocated
to the correct LAG
Aggr (Aggregation) – indicates whether link aggregation is
enabled or disabled on the port
Time out Indicates whether a timeout value is set for the port
Act (Activity) – indicates whether the link is active (port can
send and receive LACPDU messages) or passive (port
does not initiate LACP messages but will respond to
LACP messages)
Table 106 Show LAG LACP Partner Output Fields (Continued)
Label Description

Table of Contents

Related product manuals