Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 809
Output Example
*A:ALU-1># show lag 1 port
===============================================================================
Lag Port States
LACP Status: e - Enabled, d - Disabled
===============================================================================
Lag-id Port-id Adm Act/Stdby Opr Primary Sub-group Forced Priority
-------------------------------------------------------------------------------
1(e) 1/1/7 up standby down yes 2 - 32768
1/6/1 up active down 1 - 32768
===============================================================================
*A:ALU-1>#
Partner oper system ID The partner operational system ID associated with the
member port
Partner admin key The partner administrative key associated with the
member port
Partner oper key The partner operational key associated with the member
port
Partner admin port The partner administrative port associated with the
member port
Partner oper port The partner operational port associated with the member
port
Partner admin port prio The partner administrative port priority associated with
the member port
Partner oper port prio The partner operational port priority associated with the
member port
Partner admin state The administrative state of the partner
Partner oper state The operational state of the partner
Table 108 Show LAG Port Output Fields
Label Description
Lag Port States
LACP status Indicates whether LACP is enabled or disabled
Lag-id The LAG identifier and LACP status code
Port-id The member physical port ID
Table 107 Show LAG Detailed LACP Partner Output Fields (Continued)
Label Description
To Next Page
Loading...
