7705 SAR Interfaces
820
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
Packets 3048223 3054306
Errors 0 0
Class 2
Octets 2987255600 2993220860
Packets 3048220 3054307
Errors 0 0
Class 3
Octets 2987257560 2993220860
Packets 3048222 3054307
Errors 0 0
===============================================================================
Note: The mlppp command shows all bundles in the MLPPP group. The bundle-ppp
command shows information on the specified bundle. The fields for both commands are the
same.
Table 112 Show Multilink Bundle MLPPP Output Fields
Label Description
Bundle Id The port ID for this bundle
Type The type of this multilink bundle:
mlppp: the bundle is of type MLPPP
Admin State Up: the bundle is administratively up
Down: the bundle is administratively down
Oper State Up: the bundle is operationally up
Down: the bundle is operationally down
Port State The state level of the port:
none: the port is either in its initial creation state or is just about to
be deleted
ghost: no member links are configured as part of this bundle
down: all member links are in the “none”, “ghost”, or “down” state
linkUp: at least one member link is in the port state “link up” but
the bundle protocol is not yet operationally up (due to the bundle
protocol still coming up; for example, due to an insufficient
number of member links in the “link up” state or to the bundle
being shut down)
Up: the bundle is ready to pass some kinds of traffic as the bundle
protocol has come up (at least “minimum links” member links are
in the port state up and the bundle protocol is up)
To Next Page
Loading...
