Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 845
Description The clear mda form of this command reinitializes the specified adapter card or DSL module
and clears all the collected fabric statistics related to the card or module. The clear mda
statistics form of this command clears all the collected fabric statistics related to the
specified adapter card or DSL module. The clear mda ring form of this command clears the
dynamic FDB entries related to the specified ring adapter card.
Parameters mda-id — the slot number of the specified adapter card or DSL module
statistics — specifies that fabric statistics will be cleared for the specified adapter card
or DSL module
source-mda — clears all the network and access ingress traffic statistics in the fabric
direction from the specified adapter card towards all other destination adapter cards
destination-mda — clears all the network and access ingress traffic statistics towards
the specified adapter card fabric port, from all other adapter cards
fabric-port — clears the fabric port statistics towards the specified destination adapter
card, if the specified adapter card has fabric-stats-enabled. If the specified adapter
card does not have fabric-stats-enabled, no statistics will be cleared.
fabric-global — clears global fabric statistics collected for all egress traffic from the
fabric
fabric-firewall — clears fabric firewall statistics collected for all egress traffic from the
fabric
all — clears all the collected fabric statistics across all adapter cards or modules. This
command is equivalent to clearing the specified adapter card using all keywords
above (source-mda, destination-mda, fabric-port, and fabric-global).
security — clears only security statistics for the specified adapter card
encryption — specifies that encryption statistics will be cleared for the specified adapter
card
firewall — specifies that firewall statistics will be cleared for the specified adapter card
ip-transport — specifies that IP transport statistics will be cleared for the specified
adapter card
mirror — specifies that mirror statistics will be cleared for the specified adapter card
mda-id all — clears all the collected fabric statistics related to the specified adapter card.
This command is equivalent to clearing the specified adapter card using all keywords
above (source-mda, destination-mda, fabric-port, fabric-global).
ring all — clears the entire dynamic FDB
ieee-address — clears the dynamic FDB entry for the specified MAC address
port-id — clears the dynamic FDB entries for the specified port
To Next Page
Loading...
