Nord Drivesystems NORDAC FLEX SK 210E Series - Potentiometers P1 and P2 (SK 2 X0 E Size 4 and SK 2 X5 E)

4 Commissioning
BU 0200 en-3118 109
Pos: 23 9 /Anlei tung en/El ektr onik/FU und Star ter/4 . Inbe trieb nahme/ SK 1xx E, SK 2x xE, -FDS/Inbetriebnahme Gerät/ Poten tiom etern P 1 und P2 (S K 2x0E BG 4 und SK 2x5E ) [SK 2 xxE] @ 1\mod_1343222441209_388.docx @ 37549 @ 4 @ 1
4.3.2.4 Potentiometers P1 and P2 (SK 2x0E size 4 and SK 2x5E)
The setpoint can be set to a fixed value with the integrated potentiometer P1. Adjustment of the start-
up and braking ramps can be made via potentiometer P2.
Potentiometers
P2
P1
Potentiometers
P1 (continuous) P2 (stepped)
0 %
P102/103
P105
-
-
-
10 % 0.2 s 10 Hz 1 P102/103 P104
20 % 0.3 s 20 Hz 2 0.2 s 2 Hz
30 % 0.5 s 30 Hz 3 0.3 s 5 Hz
40 %
0.7 s
40 Hz
4
0.5 s
10 Hz
50 %
1.0 s
50 Hz
5
0.7 s
15 Hz
60 %
2.0 s
60 Hz
6
1.0 s
20 Hz
70 %
3.0 s
70 Hz
7
2.0 s
25 Hz
80 %
5.0 s
80 Hz
8
3.0 s
30 Hz
90 %
7.0 s
90 Hz
9
5.0 s
35 Hz
100 %
10.0 s
100 Hz
10
7.0 s
40 Hz
The function of P1 and P2 depends on DIP 4/5. The meaning changes according to the setting.
As standard, P1 sets the setpoint value of 0-100 % and P2 sets the ramp from 0.2-7 sec.
Pos: 24 0 /Allg emein/ Allg emeing ültig e Module/---------Seitenu mbruc h komp akt --------- @ 13\mod_1476369695906_0.docx @ 2265495 @ @ 1