NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters
16 BU 0200 en-3118
Pos: 28 /A nl eitu nge n/El ek tro nik/FU u nd S tart er/ 1. Allg emei n es/O ptionsbaugruppen_Ergänzung FU [BU0180, BU0200] @ 6\mod_1430905865662_388.docx @ 215532 @ @ 1
The SK CU4-POT potentiometer adapter is an exception among the "SK CU4 Modules", since it is not
integrated in the device but attached to it.
Communication between "intelligent" option modules and the device takes place via the system bus.
Intelligent option modules are modules with their own processor and communication technology, as is
the case with field bus modules, for example.
The frequency inverter can manage the following options via its system bus:
1 x ParameterBox SK PAR-3H and (via an RJ12 connector)
1 x field bus option (e.g. Profibus DP), internal or external and
2 x I/O extension (SK xU4-IOE-…), internal and / or external
1 x CANopen absolute encoder
Up to 4 frequency inverters with their appropriate options can be connected to a system bus.
Pos: 29 /Anlei tunge n/Ele ktro nik/FU und Start er/1. Allge mein es/Lie ferung @ 0\mod_1325780242208_388.docx @ 5339 @ 2 @ 1
1.2 Delivery
Check the equipment immediately after delivery / unpacking for transport damage such as
deformation or loose parts.
If there is any damage, contact the carrier immediately and carry out a thorough assessment.
Important! This also applies even if the packaging is undamaged.
Pos: 30 /A llg em ein/ Allg em eing ülti ge M od ule/ ---------Seite numbruc h kom pakt --------- @ 13\ mod_1476369695906_0.docx @ 2265495 @ @ 1
To Next Page
Loading...
Need help?
General
