1 General
BU 0200 en-3118 27
Pos: 38 /A nl eitu nge n/El ek tro nik/FU u nd S tart er/ 1. Allg emei n es/Si ch erhei ts- und Inst all ati onshi n weis e u nd War n- Gef ahren hin weis e/ne u/W arn- und Gef ahr enhin wei se_ 01 [ all e G erät e] @ 1 2\mod_1466692721681_388.docx @ 332654 @ 2 @ 1
1.5 Warning and hazard information
Pos: 39 /A nl eitu nge n/El ek tro nik/FU u nd S tart er/ 1. Allg emei n es/Si ch erhei ts- und Inst all ati onshi n weis e u nd War n- Gef ahren hin weis e/ne u/W arn- und Gef ahr enhin wei se_ 02 [ all e G erät e] @ 1 2\mod_1466692799540_388.docx @ 332689 @ @ 1
Under certain circumstances, hazardous situations may occur in association with the frequency
inverter. In order to give explicit warning of possibly hazardous situations, clear warning and hazard
information can be found on the device and in the relevant documentation.
Pos: 40 /A nl eitu nge n/El ek tro nik/FU u nd S tart er/ 1. Allg emei n es/Si ch erhei ts- und Inst all ati onshi n weis e u nd War n- Gef ahren hin weis e/ne u/W arn- und Gef ahr enhin wei se am Pr o dukt [all e d ez entr alen G erät e] @ 19\ mod_1506083521514_388.docx @ 2366228 @ 3 @ 1
1.5.1 Warning and hazard information on the product
The following warning and hazard information is used on the product.
Symbol
Supplement to
symbol
1)
Meaning
DANGER
Device is live
> 5min after
removing mains
voltage
The device contains powerful capacitors. Because of this, there may be a
hazardous voltage for more than 5 minutes after disconnection from the mains.
Before starting work, check that the device is free of voltage at all power
contacts by means of suitable measuring equipment.
It is essential to read the manual in order to prevent hazards!
The heat sink and all other metal components as well as the surfaces of plug
connectors may heat up to temperatures in excess of 70°C.
• Danger of injury due to local burns on contact.
• Heat damage to adjacent objects
Allow sufficient cooling time before starting work on the device. Check the
surface temperatures with suitable measuring equipment. Maintain an
adequate distance to adjacent components or provide protection against
contact.
The device contains electrostatically sensitive components, which can be
easily damaged by incorrect handling.
Avoid all contact (indirect contact by tools or similar, or direct contact) with
PCBs and their components.
1) Texts are written in English.
Table 4: Warning and hazard information on the product
Pos: 41 /Allgemein/Allgemeingültige Mod ul e/---------Seite numbruc h kom pakt --------- @ 13\ mod_1476369695906_0.docx @ 2265495 @ @ 1
To Next Page
Loading...
Need help?
General
