Replacing the CPU 151
Step Action
1
Remove the new microprocessor from its antistatic package.
CAUTION
Do not touch the pins on the microprocessor. The pins
are static-sensitive and bend easily.
2
Install the new microprocessor and heat sink as shown in "Install new
CPU" (page 152). See also the description that follows on page 210.
Nortel CallPilot
703t Server Maintenance and Diagnostics
NN44200-702 01.03 Standard
5.0 3 April 2007
Copyright © 2007, Nortel Networks Nortel Networks Confidential
.
To Next Page
Loading...
