Numatics G3 Series - Analog Module Factory Defaults

G3 Series EtherNet/IP
TM
DLR Technical Manual
10-101
TDG3EDM1-6EN 3/18
Subject to change without notice
www.asco.com/g3
10.4 Analog Module / Factory Defaults
FACTORY DEFAULT SETTINGS
Description
Default
Low Alarm Values
0 V / 4 mA
High Alarm Values
10 V / 20 mA
Brightness
Medium
Factory Default Settings
1. Press the SET button to enter the FACTORY DEFAULTS
sub-menu.
2. Press the NEXT button to select Yes or No.
a. Selecting No will bring you back to the main
FACTORY DEFAULTS menu.
b. Selecting Yes will cause the module to reset and
return all parameters to the factory default
conditions.
Press the SET button to confirm your choice.
Factory Default Settings:
FACTORY
DEFAULTS
SET DEFAULTS
YES N0