Numatics G3 Series - Factory Default Settings

G3 Series EtherNet/IP
TM
DLR Technical Manual
16-160
TDG3EDM1-6EN 3/18
Subject to change without notice
www.asco.com/g3
16.2 Factory Default Settings
FACTORY DEFAULT SETTINGS
Description
Default
IP Address
192.168.3.120
Sub Net Mask
255.255.255.0
DHCP Boot-P
Enabled
Web Server
Enabled
Diagnostic Word
Enabled
I/O Diagnostic Status
Enabled
Comm Fault – Fault Action
Off
Brightness
High
Comm. Format
SINT
Params Lock
Unlocked
Config Lock
Unlocked
Quick Connect
Disabled
Compat. Mode
Disabled
Config Mode
32