9.9 501 Series, up to 128 solenoid coils
501 series, 8 station manifold with integrated 32 coil valve driver, auxiliary power connector and mid-station supply and
exhaust ports
• To be used with 501 series valves on valve manifold assemblies with 33-128 coils.
• Up to 3 of these valve drivers can be used on each assembly
• Required to use on manifold assemblies larger than 64 coils, this manifold block has a M12 power connector to
supplement the main power connection on the G3 node and two additional port 1 supply and port 3/5 exhaust
ports.
• Aux power is required to be connected to the aux power connector provided on the extended coil valve driver.
To Next Page
Loading...
