Oki C911 Maintenance Manual

45530603TH Rev.2
5-17
Oki Data CONFIDENTIAL
5. MAINTENANCE MENUS
LEVEL0
(1) Menu option display switching
Hold down the BACK or ON LINE button or momentarily press the MENU or
MENU
button to display the option shown in a shaded area
XXXX
.
Press the MENU
or MENU button to display the menu option shown in a non-
shaded area
XXXX
.
*1 The station No. displayed by pressing CANCEL is changed by rotation.
MENU
MENU MENU
MENU
MENU
MENU MENU
MENU
BACK
ON LINE
Error code
Error code display, etc.
LEVEL0 Engine status display
Engine status display
Heater temperature
Environmental information
Belt/ low voltage thermistor temperature, temperature wait
time
MPT paper width detection value
Media weight detection value
MENU
MENU
Motor control evaluating functions
Hopping Motor Constant-Speed Timer Value/
Environmental Temperature
Fusing Motor Constant-Speed Timer Value/
Fusing Target Temperature
ID Motor Constant-Speed Timer Value
BELT Motor Constant-Speed Timer Value
Consumable tag noise test monitor
Display of the number of noise detections and
number of BF line error detections
Display of the number of noise detections and
number of TC line error detections
Display of the number of noise detections and
number of ID line error detections
Display of the number of noise detections and
number of spot color line error detections
To ne r se n s or mo n i to r
Station 1 to 4 Toner
sensor status monitor
display
Station 5 Toner sensor
status monitor display
To ne r pu l se c ou n t m o ni t o r
Station 1, 2 Number of toner
FULL/ LOW-pulse detections
Station 3, 4 Number of toner
FULL/ LOW-pulse detections
Station 5 Number of toner
FULL/ LOW-pulse detections
Each voltage display category during
printing
First transfer (TR1) output voltage(1)*1
First transfer (TR1) current
measurement value (1)*1
First transfer (TR1) current
measurement value (2)*
First transfer (TR1) voltage control
value*1
Second transfer (TR2) output voltage
Second transfer (TR2) current
measurement value
Second transfer (TR2) voltage control
value(1)
Second transfer (TR2) voltage control
value(2)
Second transfer (TR2) voltage control
value(3)
Charge (CH) voltage *1
Development (DB) voltage *1
Supply (SB) voltage*1
Environmental level
Supply (SB) voltage (After)*1
Supply (SB) voltage (Before)*1
Current monitor value
Anti crown roller output current/ Input
voltage information

Oki C911 Specifications

General

Brand	Oki
Model	C911
Category	Printer
Language	English