Oki C911 Maintenance Manual

45530603TH Rev.2
4-7
Oki Data CONFIDENTIAL
4. TROUBLESHOOTING PROCEDURE
LCD Status Message
( represents a blank line.)
Online
indicator
Inspection
lamp
Details
Error
code
The data was
deleted because a
duplex printing error
occurred
Check the paper and
paper settings, then
print again. To turn
off the display, press
OK
Please see HELP for
details
Off Blink Indicates that duplex printing is requested
to the paper not supporting duplex
printing; therefore, the print data has
been deleted and the printing has been
cancelled.
Error
455
The data will be
deleted due to an
overprint feature
error
Check the paper and
paper settings, then
print again. To turn
off the display, press
OK
Please see HELP for
details
Off Blink Indicates that spot color overprint is
requested to the paper not supporting
spot color overprint; therefore, the print
data has been deleted and the printing
has been cancelled.
Error
456
The data will be
deleted due to an
overprint feature
error
Mount the duplex
printing unit and print
again. To turn off the
display, press OK
Please see HELP for
details
Off Blink Indicates that spot color overprint is
requested with no duplex (spot color
overprint) unit installed; therefore, the
print data has been deleted and the
printing has been cancelled.
The status of non-installation of a duplex
unit indicates that the printer is turned
on without installation of a duplex unit
so that the printer recognizes no duplex
unit; not indicate that a duplex unit was
installed, recognized and then removed.
Error
458
LCD Status Message
( represents a blank line.)
Online
indicator
Inspection
lamp
Details
Error
code
A spot color printing
error has occurred.
Data will be erased.
Check the paper and
paper settings, then
print again. To turn
off the display, press
OK.
Please see Help for
details
Off Blink Indicates that a print request was issued
for which custom media or spot color
cannot be used; therefore, the print data
has been deleted and the printing has
been cancelled.
(Impossibility of spot color printing is the
same as impossibility of custom media
printing.)
Error
459
Change %MEDIA_
SIZE%%MEDIA_
TYPE% in MPTray
Press OK Button
Please see HELP for
details
Off Blink Indicates that either the paper size set to
the tray or the paper size/media type of
paper does not agree with the print data.
Prompts the user to load proper paper in
the tray. (It takes time until the statue is
cleared after insertion of the tray and rise
of the lever.)
Error 460: MP Tray
The unit of paper size in the Custom
mode follows the unit for display (menu
setting) specified for MP Tray unless
otherwise specified by the driver.
If specified by the driver, paper size is
displayed in the unit specified by the
driver.
Paper size display in the Custom mode:
“<Width> x <Length> <unit>”
ex : 210 x 297 mm
8.5 x 11.0 inch
The user needs to press the OK button
after replacement of the paper.
If Media_Size covers both portrait and
landscape, %MEDIA_SIZE% additionally
shows an icon indicating the paper
orientation after the paper size.
Error
460

Oki C911 Specifications

General

Brand	Oki
Model	C911
Category	Printer
Language	English