4
CP1E CPU Unit Hardware User’s Manual(W479)
The CP1E CPU manuals are organized in the sections listed in the following tables. Refer to the appro-
priate section in the manuals as required.
Manual Configuration
CP1E CPU Unit Hardware User’s Manual (Cat. No. W479)
(This Manual)
Section Contents
Section 1 Overview and Specifica-
tions
This section gives an overview of the CP1E, describes its features, and
provides its specifications.
Section 2 Basic System Configura-
tion and Devices
This section describes the basic system configuration and unit models
of the CP1E.
Section 3 Part Names and Functions This section describes the part names and functions of the CPU Unit,
Expansion I/O Units, and Expansion Units in a CP1E PLC .
Section 4 Programming Device This section describes the features of the CX-Programmer for CP1E
used for programming and debugging PLCs, as well as how to connect
the PLC with the Programming Device.
Section 5 Installation and Wiring This section describes how to install and wire CP1E Units.
Section 6 Troubleshooting This section describes how to troubleshoot problems that may occur
with a CP1E PLC, including the error indications provided by the CP1E
Units.
Section 7 Maintenance and Inspec-
tion
This section describes periodic inspections, the service life of the Bat-
tery, and how to replace the Battery.
Section 8 Backup Operations Backup operations cannot be used with the CP1E.
Section 9 Using Expansion Units
and Expansion I/O Units
This section describes application methods for Expansion Units.
Appendices The appendices provide information on model numbers, dimensions,
wiring diagrams, and wiring serial communications for the CP1E.
CP1E CPU Unit Software User’s Manual (Cat. No. W480)
Section Contents
Section 1 Overview and SYSMAC
Features
This section gives an overview of the CP1E, describes its features and
application procedures, and describes the features of SYSMAC PLCs.
Section 2 CPU Unit Memory This section describes the types of internal memory in a CP1E CPU
Unit and the data that is stored.
Section 3 CPU Unit Operation This section describes the operation of a CP1E CPU Unit.
Section 4 Initial Settings for CPU
Unit
This section describes the initial settings required for a CP1E CPU Unit.
Section 5 Programming Concepts This section provides basic information on designing ladder programs
for a CP1E CPU Unit.
Section 6 I/O Memory This section describes the types of I/O memory areas in a CP1E CPU
Unit and the details.
Section 7 File Operations File operations cannot be used with the CP1E.
Section 8 I/O Allocation This section describes I/O allocation used to exchange data between
the CP1E CPU Unit and other units.
Section 9 PLC Setup This section describes the PLC Setup, which are used to perform basic
settings for a CP1E CPU Unit.
Section 10 Overview and Allocation
of Built-in Functions
This section lists the built-in functions and describes the overall applica-
tion flow and the allocation of the functions.
To Next Page
Loading...
Need help?
General
