Omron E5ZN - Page 205

191
Sensor Input Setting Ranges/Control Ranges Appendix B
Communications Setting Level
Input error output sero off off: Sensor error alarm output disabled
on: Sensor error alarm output enabled
(analog output models only)
Cold junction compensation
method
cjc on off: External, on: Internal
Parameter No. 1 display:
Characters
No. 2 display:
Default
Set (monitor) value
Communications data length len 7 7: 7, 8: 8
Communications stop bit sbit 2 1:1 bit, 2: 2 bits
Communications parity prty eUen none: None, eUen: Even, odd: Odd
Communications response
wait time
sdwt 20 0 to 9999
Parameter No. 1 display:
Characters
No. 2 display:
Default
Set (monitor) value