Install a PCIe Card or Filler Panel
b.
Return the server to the normal operating position.
See “Return the Server to the Normal Operating Position” on page 170.
c.
Reconnect all power cords to the server power supplies.
See “Attach Power Cords” on page 172.
d.
Power on the server.
See “Power On the Server (Oracle ILOM)” on page 172 or “Power On the Server
(Power Button)” on page 173.
9.
Refer to the documentation shipped with the PCIe card for information about
configuring the PCIe card, including installing required operating systems.
To create or recover RAID configurations, refer to the LSI MegaRAID SAS Software User's
Guide.
Related Information
■
“Remove a PCIe Card or Filler Panel” on page 123
128 SPARC T5-2 Server Service Manual • February 2017
To Next Page
Loading...
