Tools Needed For Service
Note - An antistatic wrist strap is no longer included in the accessory kit for this server.
However, antistatic wrist straps are still included with options.
Antistatic Mat
Place ESD-sensitive components such as motherboards, memory, and other PCBs on an
antistatic mat.
Related Information
■
“Prevent ESD Damage” on page 62
■
“Tools Needed For Service” on page 55
Tools Needed For Service
You need the following tools for most service operations:
■
Antistatic wrist strap
■
Antistatic mat
■
No. 2 Phillips screwdriver
■
No. 1 flat-blade screwdriver (battery removal)
■
Pen or pencil (to power on server)
Related Information
■
“Safety Information” on page 53
Filler Panels
A filler panel is an empty metal or plastic enclosure that is installed at the factory or in the field
into a server component slot that does not contain a functioning component. The filler panels
ensure proper airflow through the system. Depending on the component configuration, the
server can include the following types of filler panels:
■
Drive filler
■
PCIe card filler covering back panel, not filling the connector slot)
Preparing for Service 55
To Next Page
Loading...
Need help?
General