Interpreting LEDs
■
“Managing Faults” on page 46
Front Panel Controls and LEDs
No. LED Icon or Label Description
1 Locator LED and
button
(white)
You can turn on the Locator LED to identify a particular server. When lit, the LED blinks
rapidly. Turn on the Locator LED by pressing the Locator button, or see “Locate the
Server” on page 57.
2 Service Required
LED
(amber)
The fmadm faulty command provides details about any faults that cause this indicator to
light. See “Check for Faults” on page 46.
Under some fault conditions, individual component fault LEDs are lit in addition to the
Service Required LED.
3 Power OK LED
(green)
Indicates these conditions:
■ Off – Server is not running in its normal state. Server power might be off. The SP
might be running.
■ Steady on – Server is powered on and is running in its normal operating state. No
service actions are required.
■ Fast blink – Server is running in standby mode and can be quickly returned to full
function.
■ Slow blink – A normal but transitory activity is taking place. Slow blinking might
indicate that server diagnostics are running or that the server is booting.
Detecting and Managing Faults 37
To Next Page
Loading...
Need help?
General