Oracle SPARC T5-2 User Manual

Managing Faults
Managing Faults
These topics describe the PSH feature.
■
“PSH Overview” on page 46
■
“Check for Faults” on page 46
■
“Clear a Fault” on page 49
PSH Overview
PSH provides problem diagnosis on the SP and the host. Regardless of where a fault occurs,
you can view and manage the fault diagnosis from the SP or the host.
When possible, PSH initiates steps to take the component offline. PSH also logs the fault to the
syslogd daemon and provides a fault notification with a message ID. You can use the message
ID to get additional information about the problem from the knowledge article database.
A PSH console message provides this information about each detected fault:
■
Type
■
Severity
■
Description
■
Automated response
■
Impact
■
Suggested action for system administrator
If PSH detects a faulty component, use the fmadm faulty command to display information
about the fault. See “Check for Faults” on page 46.
Related Information
■
“Check for Faults” on page 46
■
“Clear a Fault” on page 49
Check for Faults
The fmadm faulty command displays the list of faults detected by PSH. You can run this
command from either the host or through the Oracle ILOM fault management shell.
46 SPARC T5-2 Server Service Manual • February 2017

Oracle SPARC T5-2 Specifications

General

Brand	Oracle
Model	SPARC T5-2
Category	Server
Language	English